home > products > solder bath treatment > anti-oxidant pellets > SnPb
Search for:
IF Anti oxidant pellets

INTERFLUX®

IF Anti oxidant pellets is an additive to solder baths which reduces oxide formation. It is based on pellets made from a Sn (62,5 to 63,5%) and Pb alloy with an anti oxidant.
IF anti oxidant pellets is recommended for use on alloys without incorporated oxide reducing additives, under air. The pellets can be used with all SnPb based llloys for solder baths.

Anti oxidant pellets

  
Application

The function of these tablets is to slow down the formation of the tin-lead oxides on a solderbath. The addition of the anti-oxidants creates an invisible layer on the surface of the solder, protecting it against oxidation and providing better metal fluidity.
As a result boards will be cleaner and show better top side hole wetting.

 
 
  Start up:
Add from minimum 1 pellet (appr. 4,5g) for every 10kg of solder bath fill to maximum 2 pellets (appr. 9g) for every 1kg of solder bath fill.
 
  Follow up:
Add the required amount of anti oxidant pellets with every new solder bar added to the solder bath.
   
   

 
Technical specifications

 

 


alloy
melting point


SnPb

 


183 °C






documents  
 

technical data sheet
pdf safety sheet


pdf anti oxidant pellets leaflet



 


packaging


Interflux anti oxidant pellets are available in 250g bottles.
blue label SnPb pellets
green label Lead free pellets

   
 
 
© 2007-2008 All Rights Reserved by Interflux Electronics